Battery & power: T-Mobile Sonic 4G Mobile HotSpot

Learn how to replace the battery and save battery life on the T-Mobile Sonic 4G Mobile HotSpot. Find out more on this page:

 

Battery

Battery life

 

 

Battery

Insert / remove battery

To to insert or remove the battery in your device, follow these steps:

 

  1. Press down on the back cover and slide, as shown.
    image023.png
  2. Pull the back cover away to remove it.
    Note: You will find the default SSID (Service Set Identifier) and password printed on the label under the back cover. You will need this information when you connect the Mobile HotSpot to other devices.
    image026.gif

 

Insert

  1. Insert the battery by aligning the contacts on the battery with the contacts in the battery compartment.
  2. Press the battery into place, as shown.
    image029.jpg

 

Remove

Remove the battery by lifting at the notch, as shown.

image029.jpg

 

 

Back to top

 

 

Battery life

Battery saving mode

To turn on, turn off, or use battery life saving features on the device, follow these steps:

 

We're sorry, but this feature is not available for this device.

 

 

Battery saving mode settings

To change settings for the battery life saving feature, follow these steps:

 

We're sorry, but this feature is not available for this device.

 

 

Tips to save battery life

To save and extend battery life, follow these steps:

 

Your device should have a Lithium-based battery which means that leaving it on the charger will not damage the battery, even if it is already fully charged. Take advantage of AC power sources when they are available at home or at work for extended periods of time.

 

You should only use chargers that are approved by the manufacturer.

 

 

Back to top