Device hardware: Motorola CLIQ 2

Table of Contents

To return to the top of the document, press the Home key.

 

 

Battery

Battery - Charge

 

To charge the battery, follow these steps:

 

  • Note: If the battery level is below 25%, use the AC adapter instead of a car charger or USB cable.
  1. Insert the small end of the charging or USB cable into the port on the left side of the phone.
  2. Plug the other end of the cable into a wall outlet or USB port on your computer.

 

Battery - Insert / remove

 

To insert or remove the battery, follow these steps:

 

To insert

 

  1. Lift the back cover off your phone.
  2. Insert the battery with the gold contacts on the battery facing the gold contacts in the battery compartment.
  3. Replace the back cover until it clicks into place at all four sides.
  4. Verify the back cover is locked securely and that there are no gaps between the back cover and phone.

 

15461_160_284_cache.png

 

To remove

 

  1. Lift the back cover off your phone.
  2. Lift up the battery to remove.
  3. Replace the back cover until it clicks into place at all four sides.
  4. Verify the back cover is locked securely and there are no gaps between the back cover and phone.

 

Battery Manager- Access

 

To access the Battery Manager, follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings (Configuración).
  3. Tap Battery & Data Manager (Admin. de batería).

 

Battery Manager - Change battery profile

 

To change the Battery Manager profile, follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings (Configuración).
  3. Tap Battery & Data Manager (Admin. de batería).
  4. Tap Battery Mode (Modo de batería).
  5. Tap the following options:
    • Maximum battery saver (Maximo economizador de batería):Offers best battery saving and least automatic data update.When the phone is not connected to a charger: It stops syncing data after 15 minutes of inactivity during the day and night; it dims the display.
    • Nighttime saver (Economizador nocturno):Offers normal operations during the day and battery saving during night. When the phone is not connected to a charger: It stops syncing data after 15 minutes of inactivity during off-peak hours (10:00 PM – 5:00 PM). Syncing resumes when you tap any key.
    • Performance mode (Modo de desempeño):Offers phone sync without restriction throughout the day. This mode offers no battery saving.
    • Custom battery saver (Economizador de bateria personalizado): Helps create your own battery saving profile.
  6. Tap OK (Aceptar) if necessary.

 

Battery Manager - Set battery profile options

 

To set the options for the Battery Manager profile, follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings (Configuración).
  3. Tap Battery & Data Manager (Admin. de batería).
  4. Tap Battery Mode (Modo de batería).
  5. Tap Custom battery saver (Economizador de batería personalizado).
  6. Tap OK (Aceptar).
  7. Tap the Gear icon next to Custom battery saver (Economizador de batería personalizado).
  8. Edit any of the following options:
    • Off-Peak hours (Horas no pico)
    • Peak hours (Horas pico)
    • Display brightness (Brillo de pantalla)
  9. Tap OK (Aceptar).

 

Battery Manager - Overview

 

Review the following information about the Battery Manager profile:

 

The Battery Manager application provides significant battery savings by allowing you to set data traffic timeout and display brightness during peak and off-peak hours of the day.

 

Data Timeout


On: After a period of inactivity, background data updates (E-mail, Social Networking, News Feeds, etc.) stop until the phone is used again.

Off: Background data updates constantly, even overnight.

 

 

Auto Brightness

 

On: When the battery level gets low, the display dims automatically.

Off: The display does not dim automatically.

 

 

Back to top

 

 

SIM card

 

Related error: 'Insert SIM'

To insert or remove the SIM card, follow these steps:

 

To insert

 

  1. Lift the back cover off your phone.
  2. Lift the battery and remove.
  3. Slide the SIM card into the SIM card slot as shown below.
  4. Insert the battery back into the battery compartment.
  5. Replace the back cover until it clicks into place on all four sides.
  6. Verify the back cover is locked securely and there are no gaps between the back cover and phone.

 

15462_133_245_cache.png

 

 

To remove

 

  1. Lift the back cover off your phone.
  2. Lift the battery and remove.
  3. Slide the SIM card out of the SIM card slot.
  4. Insert the battery back into the battery compartment.
  5. Replace the back cover until it clicks into place on all four sides.
  6. Verify the back cover is locked securely and there are no gaps between the back cover and phone.

 

15463_133_245_cache.png

 

 

 

Back to top

 

 

Indications / functions / menu

Key functions

 

To identify keys and their functions, refer to the following:

 

15464_310_460_cache.png

Display screen icons

 

To understand the meaning of display screen icons and indicators, refer to the following:

 

15466_228_600_cache.png

Liquid damage indicator (LDI)

 

Each T-Mobile phone includes an indicator that shows if it has been subjected to water, thereby voiding the warranty. To view the Liquid Damage Indicator (LDI), remove the back cover and battery from your phone. Refer to the following illustrations to read the label:

 

Figure 1: White LDI (indicates no liquid damage)

 

15467_310_175_cache.png

 

Figure 2: Red LDI (indicates liquid damage)

 

15468_310_170_cache.png

 

 

Back to top

 

 

Memory

Set default memory location

 

We’re sorry, but this feature is not an available on your particular phone model.

 

 

 

Back to top

 

 

Use Task Manager

 

The Motorola Task Manager is an application that helps you maintain the performance of your Motorola Android phone. It monitors memory and processor usage, and alerts you to problem applications. It also provides you with tools to stop and uninstall applications, or add an application to the auto-end list.

 

Access the Task Manager

 

To open Motorola Task Manager:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Scroll to and tap Task Manager (Administrador de tareas).

 

End applications

 

To turn on or turn off Auto-End Task Manager:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Scroll to and tap Task Manager (Administrador de tareas).
  3. If necessary, tap the Applications tab.
  4. Tap the check box next to the application(s) you wish to close.
  5. Tap End Apps (Eliminar todo).

 

View processor and memory usage

 

The Applications tab displays the status of the processor and memory of your phone and lists all of the applications that are installed on your phone. They are ordered by processor use, memory use, and alphabetically. Applications using the most resources are at the top of the list. If an application is using a lot of resources and you do not need the application, you can end it or uninstall it. Only applications downloaded from the Marketplace can be uninstalled. Preloaded applications can either be added to the auto-end list or be ended.

However, you cannot end or uninstall applications that are essential to the functionality of the phone.

 

To view the processor and memory usage for an application, follow these steps:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Scroll to and tap Task Manager (Administrador de tareas).
  3. Scroll down and view the processor and memory usage for each running application.

 

Auto-end applications

 

Android is a multi-tasking operating system that allows multiple applications to run at the same time. Even though an application is not active or in use, it may still be running and using memory. Assigning applications to the auto-end list reclaims memory from applications that are no longer needed. Freeing up memory improves performance.

For example, when your screen is off, the browser application does not need to be running. Adding the browser to your auto-end list will free up approximately 10-20 MB of memory.

You can add applications to this list from the Applications list, or directly from the auto-end list.

 

To auto-end applications, follow these steps:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Scroll to and tap Task Manager (Administrador de tareas).
  3. Tap the check box next to the application(s) you wish to auto-end.
  4. Tap Add to Auto-end (Auto terminar).

 

Enable performance notifications

 

When Performance Notifications are enabled, Task Manager monitors processor and memory usage when your phone's screen is active. When Task Manager detects an application that is using the processor too much, or too much memory over an extended period of time, it displays a notification in your status bar.

When you pull down the notification shade and select a notification, the Task Manager opens and scans your phone for applications that are using excessive memory or are using the processor too much. The results are in the Applications tab, where you can end or uninstall the application (unless it is a system application).

 

To enable performance notifications, follow these steps:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Scroll to and tap Task Manager (Administrador de tareas).
  3. Tap Menu.
  4. Tap Settings (Avanzado).
  5. Tap the Notification (Notificaciones) check box to select (turn on).

 

View phone memory - Phone book

 

To view the amount of free memory and used memory  in the phone book, follow these steps:

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Applications.
  4. Tap Storage  use.
  5. Scroll to and tap Contacts Storage.
  6. View Storage.

Note: To view  the applications in alphabetical order, tap the Menu key > Sort by name.

 

View phone memory - Phone book on SIM card

 

We’re sorry, but this feature is not an available on your particular phone model.

 

View phone memory

 

To view the memory status (the amount of free memory and used memory), follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings (Configuración).
  3. Tap Storage .
  4. Under Internal phone storage (Espacio total), view the amount of memory available under Available space (Espacio disponible).

 

 

 

Back to top

 

 

Memory card & transfer

Access files - On card using computer

 

To view files on a memory card from a computer, follow these steps:

 

    1. Connect the phone to your computer using the USB cable.
    2. Touch and drag the Status bar down.
    3. Tap USB connection (Conexión USB).
    4. Tap USB Mass Storage.
    5. Tap OK (Aceptar).
    6. Proceed with the following steps based on the  computer’s operating system:

Windows

      1. In the Removable Disk pop-up window, double-click Open folder to view files using Windows  Explorer.
      2. Double-click to open the folder(s) on the memory  card containing the files you want to access.
      3. When finished, on the computer, close the window  for the phone’s disk drive.
      4. Click on the Safely  Remove Hardware icon located in the system tray in the lower right-hand  corner of the computer’s desktop.
      5. Click Safely  Remove USB Mass storage Device.

Macintosh

    1. Double-click the virtual drive icon that appears on  the desktop.
    2. Double-click to open the folder(s) containing the  files you want to access.
    3. When finished, on the computer, close the window  for the phone’s disk drive.
    4. Drag and drop the virtual drive icon onto the Trash/Eject icon.

 

Access files - On card using phone

 

To view files on a memory card, follow these steps:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Tap Files (Archivos).
  3. Tap SD Card.
  4. Navigate to the desired folder and file.

 

Delete files - On card using computer

 

To delete files on a memory card from a computer, follow these steps:

 

    1. Connect the phone to your computer using the USB cable.
    2. Touch and drag the Status bar down.
    3. Tap USB connection (Conexión USB).
    4. Tap USB Mass Storage.
    5. Tap OK (Aceptar).
    6. Proceed with the following steps based on the  computer's operating system:

Windows

      1. In the Removable Disk pop-up window, double-click Open folder to view files using Windows  Explorer.
      2. Double-click to open the folder(s) on the memory  card containing the files you want to delete and select Yes.
      3. When finished, on the computer, close the window  for the phone's disk drive.
      4. Click on the Safely  Remove Hardware icon located in the system tray in the lower right-hand  corner of the computer's desktop.
      5. Click Safely  Remove USB Mass storage Device.

Macintosh

    1. Double-click the virtual drive icon that appears on  the desktop.
    2. Double-click to open the folder(s) containing the  files you want to delete, select Delete and select Yes.
    3. When finished, on the computer, close the window  for the phone's disk drive.
    4. Drag and drop the virtual drive icon onto the Trash/Eject icon.

 

Delete files - On card using phone

 

To delete files on a memory card using the phone, follow these steps:

 

  1. From any Home screen, tap the Applications (Aplicaciones) icon.
  2. Tap Files (Archivos).
  3. Tap SD Card.
  4. Navigate to the desired folder and file.
  5. Touch and hold the file you want to delete.
  6. Tap Delete (Borrar).
  7. Tap OK (Aceptar) to confirm.

 

Insert / remove card

 

To insert or remove a memory card, follow these steps:

 

To insert

 

  1. Lift the back cover off your phone.
  2. Lift the orange flap to open and slide the memory card into the slot in with the gold contact facing down.
  3. Close the orange flap.
  4. Replace the back cover until it clicks into place on all four sides.
  5. Verify the back cover is locked securely and there are no gaps between the back cover and phone.

 

15469_165_287_cache.png

 

To remove

 

  1. Lift the back cover off your phone.
  2. Lift the orange flap to open and push the memory card out.
  3. Close the orange flap.
  4. Replace the back cover until it clicks into place on all four sides.
  5. Verify the back cover is locked securely and there are no gaps between the back cover and phone.

15470_165_287_cache.png

Move files - Card to computer

 

To copy files from a memory card to a computer using a USB cable, follow these steps:

 

    1. Connect your phone to your computer using the USB cable.
    2. On your phone, touch and drag the Status bar (Barra de estado) down.
    3. Tap USB connection (Conexión USB).
    4. Tap USB Mass Storage.
    5. Tap OK (Aceptar).
    6. Proceed with the following steps based on the  computer's operating system:

Windows

      1. In the Removable Disk pop-up window, double-click Open folder to view files using Windows  Explorer.
      2. Double-click to open the folder(s) on the memory  card containing the files you want to access.
      3. When finished, on the computer, close the window  for the phone's disk drive.
      4. Click on the Safely  Remove Hardware icon located in the system tray in the lower right-hand  corner of the computer's desktop.
      5. Click Safely  Remove USB Mass storage Device.

Macintosh

    1. Double-click the virtual drive icon that appears on  the desktop.
    2. Double-click to open the folder(s) containing the  files you want to access.
    3. When finished, on the computer, close the window  for the phone's disk drive.
    4. Drag and drop the virtual drive icon onto the Trash/Eject icon.

 

Move files - Card to phone

 

We’re sorry, but this feature is not an available on your particular phone model.

 

Move files - Computer to card

 

How to copy files from a computer to a memory card using a USB cable

 

    1. Connect your phone to your computer using the USB cable.
    2. On your phone, touch and drag the Status bar (Barra de estado) down.
    3. Tap USB connection (Conexión USB).
    4. Tap USB Mass Storage.
    5. Tap OK (Aceptar).
    6. Proceed with the following steps based on the  computer's operating system:

Windows

      1. In the Removable Disk pop-up window, double-click Open folder to view files using Windows  Explorer.
      2. Double-click to open the folder(s) on the memory  card containing the files you want to access.
      3. Copy and paste or drag and drop the files into the  desired location on your memory card.
      4. When finished, on the computer, close the window  for the phone's disk drive.
      5. Click on the Safely  Remove Hardware icon located in the system tray in the lower right-hand  corner of the computer's desktop.
      6. Click Safely  Remove USB Mass storage Device.

Macintosh

    1. Double-click the virtual drive icon that appears on  the desktop.
    2. Double-click to open the folder(s) containing the  files you want to access.
    3. Copy and paste or drag and drop the files into the  desired location on your memory card.
    4. When finished, on the computer, close the window  for the phone's disk drive.
    5. Drag and drop the virtual drive icon onto the Trash/Eject icon.

 

Move files - Phone to card

 

We’re sorry, but this feature is not an available on your particular phone model.


View available memory

 

To view the amount of free and used space on a memory card, follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings (Configuración).
  3. Tap Storage .
  4. Under SD card (Tarjeta SD), view Total space (Espacio total).

 

USB settings

 

  1. To change the USB connection settings on the phone, follow these steps:
  2. Connect your phone to your computer using the USB cable.
  3. On your phone, touch and drag the Status bar (Barra de estado) down.
  4. Tap USB connection (Conexión USB).
  5. Tap one of the options:
    • Motorola Phone Portal (Portal del teléfono Motorola)
    • Windows Media Sync (Sincr. Windows Media)
    • USB Mass Storage (Almacenamiento masivo USB)
    • None (Ninguna)

 

 

Back to top

 

DOC-10609