Device hardware: T-Mobile Jet 2.0 4G Laptop Stick

Table of Contents

 

 

Computer System Requirements

 

 

Microsoft Windows

 

Important: It is strongly recommended Windows XP be updated to Service Pack 3. This update will increase overall improvement to the performance of the computer.

 

 

Windows XPWindows VistaWindows 7
Processor

300 MHz 32-bit

 

Note:

64-bit is not supported

1 GHz 32-bit

1 GHz 64-bit

1 GHz 32-bit

1 GHz 64-bit

 

Note: Starter, Business, Enterprise, Ultimate versions of Windows 7 are NOT supported.

RAM256 MB1 GB1 GB
Hard Drive Space100 MB120 MB160 MB
Web BrowserIE 5.5IE 7IE 8
OS Service Pack / VersionService Pack 2 or laterService Pack 0 or laterService Pack 0 or later
USB VersionUSB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

 

 

Mac OS X

 

 

Important: Mac 10.7 (Lion) is not officially supported, but can work if Java Realtime is installed.

 

Mac OS X 10.4

(Tiger)

Mac OS X 10.5

(Leopard)

Mac OS X 10.6

(Snow Leopard)

ProcessorPower PC G3876 MhzIntel
RAM256 MB512 MB1 GB
Hard Drive Space100 MB120 MB160 MB
Web BrowserSafariSafariSafari
OS Service Pack / VersionVersion 10.4.11 or laterVersion 10.5.8 or laterVersion 10.6.4 or later
USB Version

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

 

 

Back to top

 

 

Indicators

 

Indicator lights

Use the following table to understand what status the indicator light is showing:

 

LightStatus
Blinking green twice every 3 secondsData stick is powered on
Blinking green once every 3 secondsEDGE registration
Blinking blue once every 3 seconds3G registration
Blinking redData stick is powered on and searching for the SIM card
Solid redData stick is powered on and searching for an available network (EDGE, 3G)
Solid GreenEstablished EDGE connection
Solid blueEstablished 3G connection
OffNo power

 

 

Liquid Damage Indicators (LDI)

Every T-Mobile device includes an indicator that shows if it has been damaged by water or other liquid, thereby voiding the warranty.

 

To view the Liquid Damage Indicator (LDI), remove the cover from your device.

 

Refer to the following figures to read the indicator:

 

 

White LDI (Indicates no liquid damage)Red LDI (Indicates liquid damage)
jetLDIwhite.PNGjetLDIred.PNG

 

 

Back to top

 

 

Memory card

Your laptop stick supports a microSD memory card (not included with your purchase).

 

Memory card - insert

To insert the memory card, follow these steps:

 

  1. Remove the back cover.

    jet2.0removeback.bmp
  2. Insert the memory card into the memory card slot with the golden contacts facing the back of the laptop stick.

    jet2.0insertmemorycard.bmp
  3. Press the memory card in until it clicks into place.
  4. Replace the back cover.

 

Memory card - remove

To remove the memory card, follow these steps:

 

  1. Remove the back cover.

    jet2.0removeback.bmp
  2. Push in the memory card and release. The card should pop out of the slot.
  3. Replace the back cover.

 

 

Back to top

 

 

SIM card

Your Subscriber Identity Module (SIM) card identifies you to the wireless network. You will not be able to connect to the network without your SIM card.

 

SIM card - insert

To insert the SIM card, follow these steps:

 

  1. Remove the back cover.
    jet2.0removeback.bmp
  2. Insert the SIM card into the SIM card slot as shown.
    jet2.0insertSIM.bmp
  3. Replace the back cover.

 

SIM card - remove

To remove the SIM card, follow these steps:

  1. Remove the back cover.
    jet2.0removeback.bmp
  2. Slide the SIM card out of the SIM card slot.
  3. Replace the back cover.

 

 

Back to top

 

DOC-15412