Device hardware: T-Mobile Jet

Computer system requirements

 

Microsoft Windows

 

Important: It is strongly recommended Windows XP be updated to Service Pack 3. This update will increase overall improvement to the performance of the computer.

 

 

Windows XPWindows VistaWindows 7
Processor

300 MHz 32-bit

 

Note:

64-bit is not supported

1 GHz 32-bit

1 GHz 64-bit

1 GHz 32-bit

1 GHz 64-bit

RAM256 MB1 GB1 GB
Hard Drive Space50 MB50 MB50 MB
Web BrowserIE 5.5IE 7IE 8
OS Service Pack / VersionService Pack 2 or laterService Pack 0 or laterService Pack 0 or later
USB VersionUSB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

 

 

Important: Mac 10.7 (Lion) is not officially supported, but can work if Java Realtime is installed.

 

Mac OS X 10.4

(Tiger)

Mac OS X 10.5

(Leopard)

Mac OS X 10.6

(Snow Leopard)

ProcessorPower PC G3876 MhzIntel
RAM256 MB512 MB1 GB
Hard Drive Space100 MB120 MB160 MB
Web BrowserSafariSafariSafari
OS Service Pack / VersionVersion 10.4.11 or laterVersion 10.5.8 or laterVersion 10.6.4 or later
USB Version

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

 

 

Back to top

 

 

Indicators

Indicator lights

Use the following table to understand what status the indicator light is showing:

 

LightStatus
Blinking green twice every 3 secondsData stick is powered on
Blinking green once every 3 secondsEDGE registration
Blinking blue once every 3 seconds3G registration
Blinking redData stick is powered on and searching for the SIM card
Solid redData stick is powered on and searching for an available network (EDGE, 3G)
Solid GreenEstablished EDGE connection
Solid blueEstablished 3G connection
OffNo power

 

Refer to the picture below to determine the location of the indicator light:

 

jetindicatorlight.png

 

 

Liquid Damage Indicator (LDI)

How to find the Liquid Damage Indicator (LDI)


Each T-Mobile device includes an indicator that shows if it has been subjected to water, thereby voiding the warranty.
To view the Liquid Damage Indicator (LDI), remove the back cover of the device.

 

Refer to the following illustrations to read the label:

 

 

White LDI (indicates no liquid damage)Red LDI (indicates liquid damage)

SL40430_3797685185_img001.png

SL40430_3797685185_img002.png

 

 

Back to top

 

 

Memory Card

 

Insert / remove card

How to insert and remove the memory card


To insert and remove, follow these steps:


The Jet supports a microSDHCTM memory card (not included with your purchase).


Note: Do not remove your memory card while it is in use. Removing the memory card while in use may corrupt the data stored on your memory card and damage the memory card or your Jet.

 

  • Slide the memory card into the memory card slot with the golden contacts facing the back side of your Jet.
    • To remove, push the card in and release. The memory card will pop out.

      SL40112_2881134259_1.png

 

 

Back to top

 

 

SIM card

 

SIM card – Insert / remove

How to insert or remove the SIM card

 

To insert or remove the SIM card, follow these steps:

 

To insert


  1. Remove the SIM card slot cover.
    SL40112_2881134259_2 (1).png
  2. Insert SIM card into the SIM card slot with the golden contacts facing down and the notched corner facing out.
  3. Replace the SIM card slot cover.
    SL40112_2881134259_2_02 (1).png

To remove

  1. Remove the SIM card slot cover.
    SL40112_2881134259_2 (1).png
  2. Pull the SIM card out and remove.
  3. Replace the SIM card slot cover.
    SL40112_2881134259_2_02 (1).png

 

 

Back to top