Network, APN, and data settings: ZTE Quartz

Use these steps to support network settings on the ZTE Quartz.

 

 

 

APN & data settings

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity > Cellular > Advanced.
  3. Tap Network operators > Access Point Names.
  4. Tap T-Mobile US LTE.
  5. Verify the following settings:
    • APN: fast.t-mobile.com
    • Proxy: Not set
    • Port: Not set
    • Username: Not set
    • Password: Not set
    • MMSC:http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: Not set
    • MMS port: Not set
    • MCC: 310
    • MNC: 260
    • Authentication type: Not set
    • APN type: default.supl.mms
    • APN protocol: IPv6
    • APN roaming protocol: IPv4
    • APN enable/disable: APN enabled
    • Bearer: Unspecified
    • MVNO type: Not set
    • MVNO value: Not set

 

Mobile network feature

The device allows you to turn the Mobile networks feature on or off but does not allow a manual network selection.

 

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity.
  3. Tap Cellular to enable or disable the mobile networks feature.

 

Network mode

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity > Cellular > Advanced.
  3. Tap Preferred network type.
  4. Tap desired network type.

 

Network operators

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity > Cellular > Advanced.
  3. Tap Network operators.
  4. Tap desired option:
    • Choose automatically
    • AT&T
    • T-Mobile

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity.
  3. Tap Airplane mode to turn on or off.

 

 

Turn on / off data roaming

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity.
  3. Tap Data Roaming to enable or disable.
  4. If prompted, tap the check mark.

 

Turn on / off mobile data

  1. If your screen is dimmed, touch the screen to wake up the watch.
  2. From the clock face, press the Power button and select Settings > Connectivity.
  3. Tap Cellular to enable or disable mobile data.