SD card: Alcatel LINKZONE

    Learn how to insert and remove the SD card on the Alcatel LINKZONE.

     

    On this page:

     

     

    Insert

    1. Remove the back cover.
      Battery+1.png

       

    2. Install the SD card.
      SIM+card+++SD+card.png

       

    3. Install the battery. 
      battery+2.png

       

    4. Replace the back cover. Orient the back cover so the locating nub is inserted into the corresponding indentation. 
      Battery+3.png

       

    5. Hold down the Power key for 3 seconds until all LED indicators illuminate in blue.

     

    Remove

    1. Remove the back cover. 
      Remove Battery1.png

       

    2. Remove the battery. Insert your fingernail into the curved slot to carefully lift out the battery. 
      Remove+battery2.png

       

    3. Carefully slide out the SD card from its compartment. 
      Remove+battery3.png

       

    4. Re-insert the battery. 
      Remove+battery4.png

       

    5. Replace the back cover. Orient the back cover so the locating nub is inserted into the corresponding indentation. 
      Remove+battery5.png