Network & APN: ZTE Spro 2

Use these steps to support network settings on the ZTE Spro 2.

 

 

 

APN & data settings

  1. From the Home screen, tap Settings > System > Network > Mobile networks > Access Point Names.
  2. If available, tap the T-Mobile US APN (the bullet point fills with blue).
    If not available, tap the Menu key, and then tap New APN.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  3. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: default,supl,mms.dun
    • APN protocol: IPv4
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
    • MVNO type: None
    • MVNO value: <Not set>
  4. Tap the Menu key, then tap Save.
  5. Tap the desired APN profile you want to use. The bullet point fills with blue next to the APN profile.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. From the Home screen, tap Settings > System > Network > Mobile networks > Network operators.
  2. Wait while the device searches for available networks.
  3. Tap the desired network.

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. From the Home screen, tap Settings > System > Network.
  2. Tap the switch next to Airplane mode to turn on or off.

 

Turn on / off data roaming

  1. From the Home screen, tap Settings > System > Network > Data usage.
  2. Tap the Menu key, then tap Data roaming to turn on or off.

 

Turn on / off mobile data

  1. From the Home screen, tap Settings > System > Network > Data usage.
  2. Tap the switch next to Mobile data to turn on or off.