Network, APN, VoLTE: LG K10

Use these steps to support network settings on the LG K10.

 

 

 

APN & data settings

  1. Drag down the notification bar and tap the Settings icon at the top-right.
  2. On the Networks tab, tap More. (If using List view, under the 'WIRELESS NETWORKS' heading, tap More.)
  3. Tap Mobile networks.
  4. Tap Access Point Names.
  5. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  6. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type:<Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  7. Tap the Menu key.
  8. Tap Save.
  9. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. Drag down the notification bar and tap the Settings icon at the top-right.
  2. On the Networks tab, tap More. (If using List view, under the 'WIRELESS NETWORKS' heading, tap More.)
  3. Tap Mobile networks.
  4. Tap Network operators.
  5. Tap Search networks.
  6. The phone searches for networks. This takes several minutes.
  7. Tap to select the desired network. The phone registers you on that network.

 

Switch 2G / 4G

  1. Drag down the notification bar and tap the Settings icon at the top-right.
  2. On the Networks tab, tap More. (If using List view, under the 'WIRELESS NETWORKS' heading, tap More.)
  3. Tap Mobile networks.
  4. Tap Network mode.
  5. Tap one of the following desired band settings:
    • GSM / WCDMA / LTE (auto connect) (LTE setting)
    • GSM / WCDMA (auto connect)
    • WCDMA only
    • GSM only (2G only setting)

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. Drag down the notification bar and tap the Settings icon at the top-right.
  2. Tap the Airplane mode switch to turn it on or off.

 

Turn on / off data roaming

  1. Drag down the notification bar and tap the Settings icon at the top-right.
  2. On the Networks tab, tap More. (If using List view, under the 'WIRELESS NETWORKS' heading, tap More.)
  3. Tap Mobile networks.
  4. Tap to select the Data roaming check box.

 

Turn on / off mobile data

    1. Drag down the notification bar and tap the Settings icon at the top-right.
    2. Slide the Mobile data switch to ON/OFF.

 

Turn on / off VoLTE

      1. From any home screen, tap Phone.
      2. Tap Menu > Call settings.
      3. Tap VoLTE to turn on/off