Network & APN : ALCATEL ONETOUCH Pop 7

Use these steps to support network settings on the ALCATEL ONETOUCH Pop 7.

 

 

 

APN & data settings

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More.
  4. Tap Cellular networks.
  5. Tap Access Point Names.
  6. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN.
    • To reset your APN settings, tap the Menu key and then tap Reset to default.
  7. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <leave blank>
    • Port: <leave blank>
    • Username: <leave blank>
    • Password: <leave blank>
    • Server: <leave blank>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <leave blank>
    • MMS port: <leave blank>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <leave blank>
    • APN type: <leave blank> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APNs>
    • Bearer: Unspecified
  8. Tap the Menu key.
  9. Tap Save.
  10. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More
  4. Tap Mobile networks.
  5. Tap Network operators.
  6. Under 'Available networks,'  tap Search networks, then tap OK.
  7. Tap the desired network, then tap OK.

 

Switch 2G / 4G

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More
  4. Tap Mobile networks.
  5. Tap Network mode and select desired option.

 

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More.
  4. Tap the Airplane mode check box to enable or disable.

 

Turn on / off data roaming

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More.
  4. Tap Mobile networks.
  5. Tap the Data roaming check box to enable or disable.
  6. If prompted, tap OK.

 

Turn on / off mobile data

  1. From the home screen, tap Apps.
  2. Tap Settings.
  3. Under 'WIRELESS & NETWORKS,' tap More.
  4. Tap Mobile networks.
  5. Tap the Data enabled check box to enable or disable.