Network, APN, & VoLTE: Kyocera Hydro WAVE

Use these steps to support network settings on the Kyocera Hydro WAVE.

 

 

 

APN & data settings

  1. From the home screen, tap Apps > Settings > More.
  2. Tap Cellular networks > Access Point Names.
  3. If available, tap the T-Mobile US APN. If not available, tap the New APN icon.
    To reset your APN settings, tap the Menu key and then tap Reset to default.
  4. Check and update the following settings for the Data APN:
    • Name: T-Mobile US
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: default,supl,mms
    • APN protocol: IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
    • MVNO type: None
    • MVNO value: <Not set>
  5. Tap the Menu > Save.
  6. Tap the desired APN profile you want to use. The bullet point fills with in with a dot.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. From the home screen, tap Apps > Settings > More.
  2. Tap Cellular networks > Network operators.
  3. Tap the desired network from the list of available networks.

 

Switch 2G / 4G

  1. From the home screen, tap Apps > Settings > More.
  2. Tap Cellular networks > Preferred network type and choose from the following:
    • LTE/WCDMA/GSM (Auto mode)
    • WCDMA/GSM
    • GSM only

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. From any screen, press and hold the power button until the device vibrates.
  2. Tap Airplane mode On or Off.

 

Turn on / off data roaming

  1. From the home screen, tap Apps > Settings > More > Cellular networks.
  2. Tap the Data roaming switch On or Off.

 

Turn on / off mobile data

  1. From the home screen, tap Apps > Settings > Data usage.
  2. Tap the Cellular data switch On or Off.

 

Turn on / off VoLTE

  1. Tap Settings > More.
  2. Tap Cellular networks > Enhanced 4G LTE Mode On or Off.