Network, APN, VoLTE: Alcatel ONETOUCH Fierce XL (Windows)

Use these steps to support network settings on the Alcatel ONETOUCH Fierce XL (Windows).

 

 

 

APN & data settings

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Cellular & SIM.
  4. Tap SIM settings.
  5. Under 'Internet APN,' tap Add an internet APN.
  6. Enter the following information:
    • Profile Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Username: <Not set>
    • Password: <Not set>
    • Type of sign-in info: PAP
    • IP type: IPv4/IPv6
    • Proxy server: <Not set>
    • Proxy port: <Not set>
  7. Tap Save.
  8. Tap the desired APN profile. The bullet fills with green.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Cellular & SIM.
  4. Tap SIM settings.
  5. Tap Search for networks.
  6. Tap desired network.

 

Switch 2G / 4G

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Cellular & SIM.
  4. Tap SIM settings.
  5. Tap the Highest connection speed drop-down.
  6. Tap desired connection speed.

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Airplane mode.
  4. Tap the Status switch ON or OFF.

 

Turn on / off data roaming

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Cellular & SIM.
  4. Tap the Data roaming options drop-down.
  5. Tap don't roam or roam.

 

Turn on / off mobile data

  1. From the Home screen, tap Settings.
  2. Tap Network & wireless.
  3. Tap Cellular & SIM.
  4. Tap the Data connection switch to ON or OFF.