Software updates: Samsung Galaxy Note 10.1

Use this page to identify software versions for the Samsung Galaxy Note 10.1 as well as details on recent software updates.

 

 

 

Identify the device's current software version

 

Android version 5.0.2 / Baseband P607TUVSBPL1

  1. From the Home screen, tap the Apps icon.
  2. Tap Settings.
  3. Tap the General tab.
  4. Tap About device.
  5. Review the information in the Review software version details section below.

 

Android version 5.0.2 / Baseband P607TUVSBPH1

  1. From the Home screen, tap the Apps icon.
  2. Tap Settings.
  3. Tap the General tab.
  4. Tap About device.
  5. Review the information in the Review software version details section below.

 

Review software version details

 

VERSIONRELEASE DATEENHANCEMENTSSTATUS

Android version 5.0.2

Baseband Version:  P607TUVSBPL1

February 1, 2017

Android Security updates

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

Android version 5.0.2

Baseband Version:  P607TUVSBPH1

August 22, 2016

July and August Security updates

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

Android version 5.0.2

Baseband Version:  P607TUVUBOI2

September 28, 2015

Android 5.0

Stagefright fix

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

Android version 4.4.4

Baseband Version: P607TUVUANK2

December 15, 2014

Chinese language support

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

Android version 4.4.4

Baseband Version: P607TUVUANJ4

November 12, 2014

Kit Kat OS

Download Booster

IPv6 improvements

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

Android version 4.4.2

Baseband Version: P607TUVUANE2

May 29, 2014

Original software

If customers' devices meet the update requirements below, they can upgrade to the most current software version.

 

Determine update requirements

Customers' devices must meet the following requirements to update their software to the most current version:

  • 50% or higher battery life
  • Data connection
  • File size of update: 137.1 MB

 

 

Update software versions

 

Update automatically over the air (OTA) for P607TUVSBPL1

  1. From the Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap About device.
  4. Tap Software update.
  5. Tap OK to start the device check for updates.
  6. Tap OK to begin the update.

 

Update from a computer

Follow the device requirements above, along with the following:

  • Use a Samsung USB cable.
  • Back up your data prior to completing the update.

 

During the update, do not:

  • Use the device or press any keys.
  • Remove the battery, if applicable.
  • Turn off the device.
  • Disconnect the USB cable until the update is complete.

 

You will not be able to place a call during the update, not even an emergency call.

  1. Download and install Samsung Smart Switch that is compatible with your computer from http://www.samsung.com/us/support/smart-switch-support/#!/
  2. Connect the cable to a compatible USB port on your computer.
  3. Connect the other end of the cable to your mobile device.
  4. Allow your computer to install any required drivers for your device. This process may take a few minutes.
  5. Open Smart Switch on your computer, and allow it to make the connection.
  6. If a software update is available for your device, Smart Switch will automatically prompt you to update. At any time, you can click Update.
  7. Click Update to begin downloading the necessary files.
  8. Click OK to proceed.Your device may turn off and on a few times during the update process. Once complete the device will return to the Home screen.