Network & APN: T-Mobile 4G HotSpot Z64

Use these steps to support network settings on the T-Mobile 4G HotSpot Z64.

 

 

 

APN & data settings

  1. Access the mobile hotspot Admin Page.
  2. Click the Settings tab.
  3. Click Network Settings.
  4. Under the 'APN' heading, confirm the information entered is correct.
  5. To correct APN information, click Manual.
  6. Click Add New.
  7. Enter the following information:
    • Profile Name: T-Mobile
    • APN: fast.t-mobile.com
  8. Click Apply.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. Access the mobile hotspot Admin Page.
  2. Click Disconnect.
  3. Click the Settings tab.
  4. Click Network Settings.
  5. Under the 'Network Selection' heading, click Manual.
  6. Click Search.
  7. Select the network to connect.
  8. Click Apply.

 

Turn on / off data roaming

  1. Access the mobile hotspot Admin Page.
  2. Click Disconnect.
  3. Click the Settings tab.
  4. Click Network Settings.
  5. Under the 'WAN Connection Mode Settings' heading, check or uncheck Check here, to connect to the internet in roaming status to turn data roaming on/off.
  6. Click Apply.