Battery: Kyocera DuraForce XD

Learn how to insert and remove the battery on the Kyocera DuraForce XD.

 

On this page:

 

 

Insert

  1. Turn the screw on the back cover counter-clockwise until it clicks.
    Kyocera Remove+screw.png
  2. Use the notch on the bottom-left side to pry off the back cover.
    Kyrocera Back+cover+notch.png
  3. Unlock the battery by sliding the orange lock to the right.
  4. Insert the battery so the gold contacts align.
    Kyocera Insert+battery.png
  5. Lock the battery by sliding the orange lock to the left.
    Kyocera Lock+battery.png
  6. Snap the back cover onto the device.
  7. Turn the screw on the back cover clockwise until it is tight.

 

Remove

  1. Turn the screw on the back cover counter-clockwise until it clicks.
  2. Use the notch on the bottom-left side to pry off the back cover.
  3. Unlock the battery by sliding the orange lock to the right.
  4. Remove the battery.
  5. Lock the battery by sliding the orange lock to the left.
  6. Snap the back cover onto the device.
  7. Turn the screw on the back cover clockwise until it is tight.