Network & APN: T-Mobile Concord II

Use these steps to support network settings on the T-Mobile Concord II.

 

 

 

APN & data settings

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Mobile networks.
  4. Tap Access Point Names.
  5. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the + icon in the upper-right corner.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  6. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  7. Tap the Menu key.
  8. Tap Save.
  9. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Mobile networks.
  4. Tap Network operators.
  5. Tap Search networks.
  6. Select the network you want to use.

 

Switch 2G / 4G

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Mobile networks.
  4. To display only 2G networks, select the Use only 2G networks check box.
  5. Tap Network Operators.
  6. Tap Search Automatically.
  7. Choose desired network.

 

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap the Airplane mode switch to turn on or turn off.

 

Turn on / off data roaming

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Mobile networks.
  4. Select the Data roaming check box.
  5. Tap OK.

 

Turn on / off mobile data

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap Data usage.
  4. Tap the Mobile data slider to turn it on or off.