Network: T-Mobile myTouch 3G

Learn how to connect to data networks (2G, 4G) and data roaming on the T-Mobile myTouch 3G.

 

 

 

 

APN & data settings

 

To set the Access Point Name (APN) and turn on data settings, follow these steps:

 

  1. From the Home screen, press Menu.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Turn on Mobile Network
  5. Touch Access Point Names or APNs.
  6. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  7. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  8. Tap the Menu key.
  9. Tap Save.
  10. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

 

Manual network selection

 

To manually select the wireless network the device connects to, follow these steps:

 

  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Scroll down and touch Mobile Networks.
  5. Touch Network Operators.
  6. Touch the desired network.

 

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

 

Switch 2G / 4G

 

To change the band between 2G and 4G, follow these steps:

 

  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Touch Mobile networks.
  5. Touch Use only 2G networks to select or clear the check box.

 

 

Turn on / off Airplane mode

 

Airplane mode turns off wireless connections. This allows you to use apps and menus, but not make calls or use the internet.

 

To turn on or turn off airplane mode, follow these steps:

 

Using the shortcut key


  1. From the Home screen, press and hold the red End key.
  2. Touch Airplane mode to turn on or off.

 

Using the Settings menu

  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Wireless controls.
  4. Touch Airplane mode to turn on or off.

 

 

Turn on / off data roaming

 

To turn on or turn off data roaming, follow these steps:

 

  1. From the Home screen, press the Menu key.
  2. Touch Settings.
  3. Touch Wireless Controls.
  4. Touch Mobile networks.
  5. Touch to select (turn on) or clear (turn off) the check box for Data roaming.