Network: T-Mobile myTouch Q by LG (C800)

Learn how to connect to data networks (2G, 4G) and data roaming on the T-Mobile myTouch Q by LG (C800).

 

 

 

 

APN & data settings

 

To set the Access Point Name (APN) and turn on data settings, follow these steps:

 

  1. From any Home screen, tap the Menu key.
  2. Tap Settings.
  3. Tap the Wireless & networks tab.
  4. Tap Mobile networks.
  5. Tap Access Point Names.
  6. If available, tap the T-Mobile GPRS APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  7. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  8. Tap the Menu key.
  9. Tap Save.
  10. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

 

Manual network selection

 

To manually select the wireless network the device connects to, follow these steps:

 

  1. From any Home screen, touch the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Scroll to and touch Mobile networks.
  5. Touch Network operators.
  6. Touch Search networks.
  7. Touch the network you want to use.

 

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

 

Switch 2G / 4G

 

To change the band between 2G and 4G, follow these steps:

 

  1. From any Home screen, touch the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Scroll to and touch Mobile networks.
  5. Touch to select the Use only 2G networks check box.

 

 

Turn on / off Airplane mode

 

Airplane mode turns off wireless connections. This allows you to use apps and menus, but not make calls or use the internet.

 

To turn on or turn off airplane mode, follow these steps:

 

  1. Press and hold the Power key.
  2. Touch Airplane mode.

 

 

Turn on / off data roaming

 

To turn on or turn off data roaming, follow these steps:

 

  1. From any Home screen, touch the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Scroll to and touch Mobile networks.
  5. Touch to select the Data roaming check box to enable or disable data roaming.

 

 

Turn on / off mobile data

 

To turn on or turn off mobile data, follow these steps:

 

  1. From any Home screen, touch the Menu key.
  2. Touch Settings.
  3. Touch Wireless & networks.
  4. Scroll to and touch Mobile networks.
  5. Touch to select the Data enabled check box to enable or disable data.