Network: HTC One S

Learn how to connect to data networks (2G, 4G) and data roaming on the HTC One S.

 

 

 

 

APN & data settings

 

To set the Access Point Name (APN) and turn on data settings, follow these steps:

 

  1. Touch the Notification bar and slide down.
  2. Tap the Settings icon.
  3. Under 'Wireless & networks,' tap Mobile data.
  4. Select Data roaming.
  5. Tap Access point names.
  6. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN.
    Note: To reset your APN settings, tap the Menu key and then tap Reset to default.
  7. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  8. Tap the Menu key.
  9. Tap Save.
  10. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

 

 

Manual network selection

 

To manually select the wireless network the device connects to, follow these steps:

 

  1. Touch the Notification bar and slide down.
  2. Tap the Settings icon.
  3. Under 'Wireless & networks,' tap Mobile data.
  4. Tap Network operators.
  5. Tap Search networks.
  6. Select the desired network and follow additional prompts if necessary.

 

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

 

 

Switch 2G / 4G

 

To change the band between 2G and 4G, follow these steps:

 

  1. Touch the Notification bar and slide down.
  2. Tap the Settings icon.
  3. Under 'Wireless & networks,' tap Mobile data.
  4. Tap Network mode.
  5. Select one of the following:
    • WCDMA only
    • GSM only
    • GSM / WCDMA auto

 

 

Turn on / off Airplane mode

 

Airplane mode turns off wireless connections. This allows you to use apps and menus, but not make calls or use the internet.

 

To turn on or turn off airplane mode, follow these steps:

 

  1. Touch the Notification bar and slide down.
  2. Tap the Settings icon.
  3. Tap the Airplane mode switch to turn on or turn off.

 

 

Turn on / off data roaming

 

To turn on or turn off data roaming, follow these steps:

 

  1. Touch the Notification bar and slide down.
  2. Tap the Settings icon.
  3. Tap Mobile data.
  4. Select or clear the Data roaming bubble.