How do I perform a device software upgrade? (T-Mobile Wing™)
T-Mobile provides a software upgrade for the T-Mobile Wing. This update includes updates that will improve the overall experience with the device.
IMPORTANT: The software update only needs to be applied once. For information on how to verify your current software version, go to: How do I determine what software version I have? (T-Mobile Wing™)
NOTE: Before proceeding please ensure that all data on your Wing™ is backed up, and the e-mail settings for each of your e-mail accounts are known or are written down. Installing the new software will erase all the data on the device.
To perform a device software upgrade, perform the following steps:
1. Ensure all desired media and documents are saved to the Micro SD memory card if one is available, or have been transferred to a computer. For information on how to back up files to a computer, go to How do I back up files to a personal computer?
NOTE: All third party applications and data that remain on the device prior to downloading the new software will be deleted and un-retrievable. Third party applications will need to be re-downloaded after the new software has been installed.
2. Download the Update Utility from the T-Mobile Download Center.
3. From the File Download dialog box, click Save.
Image of File Download dialog box
4. From the Save As dialog box, in the Save in drop-down menu, click to select Desktop.
5. In the File name text box, type T-Mobile Wing MSFP Upgrade, and then click Save.
Image of Save As dialog box
6. From your computer desktop, double click the T-Mobile Wing MSFP Upgrade file.
7. From the RUU - InstallShield Wizard dialog box, click Next.
Image of RUU - InstallShield Wizard dialog box
8. From the PDA ROM Update Utility 3.12.3.7 dialog box, click the check box to select I understand the caution indicated above and have reviewed the Readme, and then click Next.
Note: Open the Readme file by clicking View Readme.
Image of PDA ROM Update Utility 3.12.3.7 dialog box
9. From the PDA ROM Update Utility 3.12.3.7 dialog box, complete the four steps listed, and then click to select I completed the steps indicated above.
10. Click Next.
Image of PDA ROM Update Utility 3.12.3.7 dialog box
NOTE: The utility will check for an ActiveSync connection and sufficient battery life.
11. From PDA ROM Update Utility 3.12.3.7 dialog box, select Update. Click Next.
Image of PDA ROM Update Utility 3.12.3.7 dialog box
12. Click Next.
Image of PDA ROM Update Utility 3.12.3.7 dialog box
Note: The update progress will be shown on the computer and on the device. The upgrade process can take between 10-15 minutes. You may notice that the progress indicator also appears to stall at 85% and 95%. This is normal behavior.
Image of update progress
13. Once the update has finished, the phone will reboot automatically. To close the Update Utility, click Finish.
Image of PDA Phone Update Utility 3.12.3.7 dialog box
NOTE: When the device boots up, it goes through the initial start up routine as if the device was hard reset, or brand new out of the box. The screen will display a Windows Mobile screen with a Microsoft logo. The device will perform an additional update that takes approximately five to ten minutes. When this occurs, the device will re-boot again and your update is complete.